How To Record Guitar In Fl Studio
FL Studio is a powerful digital sound workstation (DAW) that's been used far and wide past rappers, beat makers, and other famous music producers.
What people oftentimes don't realize about the DAW, is that information technology has many other uses including recording vocals, guitar, keys, and audio as a whole!
Besides Read: How To Record MIDI in FL Studio in v Easy Steps
Today, we break downward how to record guitar in FL Studio step past footstep for your side by side unmarried or music project.
The best part is this also applies to virtually other instrument sources whether you're recording a alive piano, bass guitar, or vocals.
Make Sure You Have Essential Gear!
Having a guitar and FL Studio software isn't enough to capture your audio-visual.
You're going to need a fashion to translate your audio-visual audio into your computer.
This is where an audio interface comes into play.
These can be pretty cheap and are essential to recording your guitar with FL Studio.
Editor'southward Pick
In addition, you'll desire the essentials: headphones, a stand, and an XLR cable.
Editor'south Option
Most interfaces should also give you the option to straight plug in your guitar line-in through an instrument cablevision.
This allows you to use the guitar'south pickup, though it isn't recommended for capturing a high quality recording.
Ideally, you'll want to buy and use a condenser microphone.
Condensers are great at handling delicate sources like an acoustic guitar or a vocal.
You'll likewise demand a stand to set up up the microphone while you're tracking.
Then, before yous click any buttons or commencement tuning your guitar, make sure y'all have the essential gear like an audio interface and (ideally) a skilful condenser microphone, headphones, and a mic stand up.
Best Option
Disclaimer: You'll need FL Studio Producer Edition or higher to record audio. The free version but allows MIDI tracking.
Editor's Pick
Fix the Audio Interface Inputs and Outputs
Assuming y'all're using an interface and microphone, which is the most mutual way to record guitar in FL Studio, you lot need to set up your estimator inputs and outputs.
This will differ whether y'all're on a Mac or Windows system.
For Mac, the interface should already be identified past your computer.
Within the FL Studio Software, click on preferences and go over to Audio Settings.
Brand sure that the inputs and outputs are selected to your audio interface (Scarlett, Audient, Apollo, etc.).
For Windows, the interface may non be automatically picked up.
You'll need to become over to audio settings in FL Studio, go to Input/Output options, and select "choose an ASIO Driver".
If you encounter your interface listed, choose that one. Now we tin move on to setting up the track.
Set-up and Arm the Runway
In one case yous have your interface setup, the mic is continued, you're in position, and your computer is recognizing the interface, you demand to select a rail and tell FL Studio to record with your selected microphone.
To do this, choose any mixer rails (just not the master track!) and modify your audio source to the interface device name.
Y'all'll take the option for this track to be mono or stereo.
If you lot're using 2 different microphones, you tin can record in stereo and capture from two unlike sources! Otherwise, but use mono.
Side by side, you'll need to arm the track.
FL Studio may do this automatically, and yous'll know if yous run across a red, lit-up icon on the track fader on the left. If not, hit this and the rail will be armed.
Caution: When arming the track, be certain to turn off your speakers!
If y'all arm the runway and plow on the microphone, there's a chance that feedback could occur.
It's all-time to mute your speakers and put on your headphones from here on out.
Adapt the Mic Gain
Y'all're so close to recording your audio-visual guitar with FL Studio!
Before hitting the record button, get the microphone stand into position and prepare your levels and gain.
Depending on your microphone, you may need to use phantom power which most interfaces can do.
With phantom ability on, you can down dial in the gain knob. You'll exercise this on the interface which will be unique to your specific device.
The best way to practice this is by playing the loudest function of your song and watching the channel level meter.
Make sure that yous're non clipping when you lot strum, as this ways the sound is distorting.
A target level peak to aim for is -10 dBFS on the fader. Remember, it'south always easier to add gain.
Once yous've dialed in your levels, you can finally hit the record push button and begin tracking!
Recording Tips
\When it comes to recording acoustic with FL Studio or any DAW for that matter, it's of import to keep a couple tips in mind to ensure a high-quality recording.
You can set upwardly all the inputs, dial in your mic gain, have an awesome sounding guitar, and yet however walk away with a bad recording if you lot don't consider these tips.
Click Rail
In general, you want to record to a click runway.
This will make sure all your audio is lining up to the aforementioned rhythm. Don't try and "wing" it!
You'll thank yourself afterward and make the unabridged product process much easier.
Record Multiple Takes
Tape multiple takes! It'south easy to record and sub over your previous takes, and you'll be able to choose your favorite have. More options don't injure
Use Headphones
Record with headphones!
Mute your overhead speakers and make sure the click isn't being picked up by the microphone from your headphones.
This volition brand a cleaner recording because the microphone will merely be capturing the guitar.
You should NEVER tape with sound coming through your chief speakers while a microphone is armed.
Sound Proofing
Treat the room equally best as yous tin can.
Acoustic paneling and/or sound foam will assist muffle reverbrances and noise in the room.
This helps the mixing phase because you've captured the recording as cleanly equally possible and information technology reduces unwanted frequencies, hums, and other abrasive sounds.
Tape Make clean
Try non to tape with whatsoever effects on the guitar. It's better to apply these during mixing rather than recording with compression, EQ, or something on the guitar rails.
The reason for this is what you're "hearing" might not be what you're really getting.
The best mode to ensure what y'all hear equals what you're capturing is to tape clean with no plug-ins or processing.
FL Studio is an incredibly versatile DAW that once mastered tin can improve your recording sessions.
Now you can add together an acoustic guitar to your "tool belt" the next time you lot offset a new project!
Source: https://www.theguitarjunky.com/record-guitar-fl-studio/
0 Response to "How To Record Guitar In Fl Studio"
Post a Comment